Resources

Owner's Manuals

PDF manuals covering setup, first-light procedures, valve care and cleaning.

• Alpha & Star — entry torches manual (PDF)
• Bravo, Champion & Modified Champion (PDF)
• STACKS modular system (PDF)
• Grand & Grand Sharp Flame (PDF)
• Sharp Flame Hand Torch (PDF)

Specification Sheets

Quick-reference one-pagers for procurement and technical evaluation.

• Full product line spec sheet (PDF)
• Fuel consumption comparison chart
• Glass capacity reference table

Safety Guidelines

Read before lighting any torch for the first time.

• Always work in a well-ventilated area with active extraction.
• Use proper didymium safety glasses rated for boro work.
• Keep oxygen lines away from oil and grease.
• Inspect hoses monthly for cracking, abrasion or B-fitting wear.
• Have an ABC fire extinguisher within arm's reach.

Video Library

Watch flame setup, valve adjustment and routine cleaning on each torch.

• Lighting your first Alpha (5 min)
• Valve maintenance walk-through (8 min)
• Champion Sharp Flame fine-tuning (12 min)
• Cleaning carbon from the burner face (4 min)

Frequently Asked Questions

• Which torch should I start with? The Alpha is our most-recommended first burner for soft-glass beadwork.
• Can I run propane and oxygen from concentrators? Yes — most of our torches work fine on a standard 10 LPM concentrator. The Star is specifically tuned for low-O₂ setups.
• What hose grade do I need? 1/4" T-grade welding hose with female B-fittings.
• How often should I clean the torch face? Every 40–60 hours of use, or whenever you see uneven flame jets.